Motorola LEX L10ig, Руководство пользователя

Страница: 158 / 194

basic VPN. Motorola Mobile VPN is added and configured by your technical support and requires
license certification for use.
When and where to use: Use this procedure to add a virtual private network to the LEX device (not
including the Motorola Mobile VPN).
Procedure:
1 Tap .
2 Tap .
3 Tap More... .
4 Tap VPN .
5 Under Gateway , enter
<IP address or domain name>
.
NOTICE: Domain name is the Fully Qualified Domain Name (FQDN) of VPN Gateway
Server.
6 Adjust the VPN slidebar.
Return to Process
Wireless Wide Area Networks on page 151
11.1.7
Emergency Broadcasts
Emergency Broadcasts allows emergency alert messages to be broadcast simultaneously from a
service provider to multiple users in within a designated geographical area. Broadcasts are often used
for weather updates, regional events, traffic conditions and other services.
When and where to use: Use this procedure to enable emergency alert messages by cell broadcasts
on the LEX device.
Procedure:
1 Tap .
2 Tap .
3 Tap More... .
4 Tap Emergency Broadcasts .
5 Check the emergency alert types you want to receive.
Return to Process
Wireless Wide Area Networks on page 151
11.2
Wireless Local Area Networks
Wireless local area networks (WLANs) allow the LEX device to communicate wirelessly inside a
building.
Before using the LEX device on a WLAN, the facility must be set up with the required hardware to run
the WLAN (sometimes known as infrastructure). The infrastructure and the LEX device must both be
properly configured to enable this communication.
MN003477A01-A
Chapter 11: Wireless
158 Send Feedback