Motorola LEX L10ig Скачать руководство пользователя страница 124

Страница: 124 / 194

8.5.1

Adjusting Sound Volume

The user can perform this procedure to adjust radio sound settings on the LEX device. The user can
choose different audio routing options.

NOTICE:

The user can also modify sound settings from the Land Mobile Radio (LMR). For

more information, see the respective LMR user manual.

Prerequisites:

Ensure that your LMR radio is successfully paired with the LEX device.

Procedure:

Adjust the sound volume by performing one of the following:

If…

Then…

If you want to adjust volume using the
Volume button* on the device,

perform the following actions:

• If you want to increase volume, press the

upper part of the

Volume

button.

• If you want to decrease volume, press

the lower part of the

Volume

button.

If you want to adjust sound volume in the
Radio Services application,

perform the following actions:

From the

Home

screen, tap

→

In the

Radio Services

window, tap

Set the radio volume by adjusting the

Ra-

dio volume

slidebar.

Figure 50: Radio Volume Slidebar

NOTICE:

*See the

Volume

button in

Features on page 29

Return to Process

Selecting Audio Routing Options

on page 123

8.6

Emergency Calling on LEX Device Paired with LMR

When Land Mobile Radio (LMR) is paired with a LEX device and the Emergency power button is
pressed (on any device where LMR is present), the LEX device reacts based on what LMR channel the
user is on and what Emergency Mode that channel is assigned.

The LEX device initiates an emergency by pressing the power button on the LEX device. See

Enabling

Emergency Mode on page 125

The following types of Emergency Modes are available and are configurable from your technician:

• Emergency Alert - A LEX device that is on a channel provisioned with this Emergency Mode, will

send an alert over the channel.

• Emergency Call - A LEX device on a channel provisioned with this Emergency Mode, gives the user

that pressed the Emergency power button (the initiator) the top priority on the channel.

MN003477A01-A
Chapter 8: Collaboration with LMR Radios

124

Send Feedback

Содержание LEX L10ig


































































































































































































Результаты поиска

Содержание LEX L10ig

Отзывы:

Похожие инструкции для LEX L10ig

Бренды по названию

Популярные бренды

Motorola LEX L10ig, Руководство пользователя

Результаты поиска

Содержание LEX L10ig

Отзывы:

Похожие инструкции для LEX L10ig

Бренды по названию

Популярные бренды