Motorola LEX L10i, Руководство пользователя

Страница: 36 / 186

Return to Process
Getting Started on page 33
2.2
Unpacking
Carefully remove all protective material from the LEX series device and save the shipping container for
later storage and shipping.
Verify that the following were received:
• LEX L10i
• Battery Cover
• 2280 mAh Lithium-ion battery
• Charger
• USB Cable
• Regulatory Guide
• Quick Start Guide
Inspect the equipment for damage. If any equipment is missing or damaged, contact the Motorola
Solutions Support Center immediately.
Return to Process
Getting Started on page 33
2.3
Setting Up
The initial setup of the LEX L10i requires that the battery and any cards be installed.
NOTICE: The device may be delivered to you with battery, SIM card, microSD card and/or
CRYPTR cards already installed, activated, and ready for use. In this case, ignore steps 2
through 6 of the following section if they were already performed.
Before using for the first time, perform the following:
1 Remove the screen protection film from the screen, see Removing the Screen Protective Film on
page 37 .
2 Install the public and/or Private SIM cards, see Installing the Public and Private SIM Cards on page
39 .
3 Install the microSD or CRYPTR card (optional), see Installing a microSD or CRYPTR micro
Encryption Card on page 38 .
4 Install the battery, see Installing the Battery on page 41 .
5 Install the battery cover.
6 Charge the device, see Charging on page 42 .
Return to Process
Getting Started on page 33
Related Links
Removing the Screen Protective Film on page 37
Removing the Battery Cover on page 37
MN002347A01-B
Chapter 2: Getting Started
36 Send Feedback