Motorola DCH3416, Руководство по установке

Страница: 66 / 72

4 DIAGNOSTICS
56
Interactive Status
This diagnostic describes the interactive information that is displayed only when the Thin
Client platform is running. The information on the OSD and front panel is updated at
least once every 5 seconds while the diagnostic is displayed. This is an example of a
code module display with status descriptions:
Figure 4-10 Interactive status front panel display
The Interactive Status fields are:
Field Description
IP Address The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC 1500 to the
DCH3416. 0.0.0.0 is displayed if the IP address is not configured or unknown.
UPM The upstream modem address value is the same as the terminal ID assigned by the
DAC 6000. It is a unique, system-generated, eight-digit integer between 1 and 16777215.
00000000 is displayed when the UPM is not configured or if it is unknown.
Upstream ID A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH3416.
0000 is displayed if the Upstream ID is not configured or if it is unknown.
Downstream
ID A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH3416.
0000 is displayed if the Downstream ID is not configured or if it is unknown.
State
The interactive status of the DCH3416:
Front
Panel OSD Description
U UNCONFIG The DCH3416 is not configured for the interactive system,
and the platform should run as pre-interactive.
C MAC_CONNECT The DCH3416 is waiting to establish a connection to the
MAC PID Stream.