42
Settings
9.7
Software version
You can view the current software version using for your handset and base.
1. Press the left
C
key, scroll
U
to
Settings
.
2. Press the left
C
key, scroll
E
to select
S/ware version
.
3. Press the left
C
key to see the information.
9.8 Registration
Up to 6 handsets can be registered to one base station. Additional handsets
must be registered to the base before you can use them.
• The instructions described below apply specifically to your handset. If you
wish to register another manufacturer’s handset, the instructions may vary.
In this case, please refer to the manufacturer of the additional handset.
• The Master PIN is required before you can register or unregister handsets.
The PIN is 0000.
9.8.1
Register a handset
1. Press the left
C
key in standby, scroll
U
to
Settings
.
2. Press the left
C
key, scroll
E
to select
Registration
.
3. Press the left
C
key, scroll
E
to select
Register
.
4. Press the left
C
key. Then press and hold
F
on the base until you hear
a beep.
5. Press the left
C
key on the handset to start the registration.
6. Enter the PIN if necessary. It will take less than 2 minutes for the handset to
complete the registration.
9.8.2 De-register a handset
1. Press the left
C
key in standby, scroll
U
to
Settings
.
2. Press the left
C
key, scroll
E
to select
Registration
.
3. Press the left
C
key, scroll
E
to select
De-register
.
4. Press the left
C
key. scroll
U
or
E
to select the handset you want to delete.
5. Press the left
C
key. Enter the PIN if necessary. De-registration is complete.
9.9
Change the system PIN
The system PIN is different from the call control PIN and remote access PIN.
1. Press the left
C
key, scroll
U
to
Settings
.
2. Press the left
C
key, scroll
E
to select
Change Sys. PIN
.
3. Press the left
C
key, enter the 4 digit PIN.
4. Press the left
C
key, enter the 4 digit PIN again.
5. Press the left
C
key to confirm.