15
Using the phone
3. Using the phone
NOTE
Your handset will automatically time the duration of all external calls. The call timer will
display after the first 15 seconds of your call. When the call ends, the total duration of your
talk time flashes on the screen for 5 seconds.
3.1 Switch the handset on / off
Press and hold
R
to switch the handset on or off.
3.2 Calls
3.2.1 Make a call
1. Press
<
.
2. When you hear the dial tone, dial the number.
3.2.2 Preparatory dialling
1. Dial the number first. If you make a mistake press
b
to delete the last digit.
2. Press
<
to dial.
3.2.3 End a call
Press
<
, or place the handset back on the base or charger.
3.2.4 Receive a call
When you receive an external call, the phone rings and
icon flashes on the display.
1. If the handset is off the base then press
<
to answer the call, or if the handset is on the
base simply lift the handset to answer the call.
NOTE
If you prefer to press
<
when you lift up the handset to answer a call, you will need to
switch Auto answer off, see page 21.
3.3 Adjust the earpiece volume
During a call, press
u
or
d
to increase or decrease the volume. There are 5 levels to
choose from.
3.4 Secrecy
You can mute your handset so that you can talk to someone nearby without your caller
hearing.
1. During a call, press
b
. The display shows
MUTE
and your caller cannot hear you.
2. Press
b
again to resume your call.
3.5 Intercom
3.5.1
Make an internal call
If you have more than one handset registered to the base, you can make internal calls
between two handsets.
Содержание D4
Страница 40: ... This page has intentionally been left blank ...
Страница 41: ... This page has intentionally been left blank ...
Страница 42: ... This page has intentionally been left blank ...