Motorola CPIP5430, Инструкция по установке и эксплуатации

Страница: 17 / 138

xvii
Chapter 4, Functional Description , describes the CPIP5430 on a block
diagram level.
Chapter 5, Rear Transition Module for CPIP5430 , describes the rear
transition module which provides additional I/O and includes information
for installing and configuring the CPIP5430-RTM1.
Chapter 6, Connector Pin Assignments , provides pin assignments for the
connectors on the CPIP5430 single-board computer and CPIP5430-
RTM01.
Appendix A, Specifications , provides environmental and mechanical
specifications, as well as power requirements for the CPIP5430.
Appendix B, Thermal Validation , provides information to conduct thermal
evaluations and identifies thermally significant components along with
their maximum allowable operating temperatures.
Appendix C, Memory Maps , provides memory maps for the CPIP5430.
Appendix D, IPMI Commands , provides commands that may be used by a
host device driver and/or application software to communicate with the
Zircon, sensors, and other management controllers in the system.
Appendix E, Related Documentation , provides a listing of related
Motorola manuals, vendor documentation, and industry specifications.
Comments and Suggestions
Motorola welcomes and appreciates your comments on its documentation.
We want to know what you think about our manuals and how we can make
them better. Mail comments to:
Motorola Computer Group
Reader Comments DW164
2900 S. Diablo Way
Tempe, Arizona 85282
You can also submit comments to the following e-mail address:
reader-comments@mcg.mot.com