Motorola CompactPCI CPX2000 Series Скачать руководство пользователя страница 54

Страница: 54 / 136

System Cables for the CPX2000 Series Chassis

http://www.motorola.com/computer/literature

3-13

CPX2208 Cables

A cable set (CPVCABLE) also ships as part of CPX2000 starter kits.

The CPX2000 Series starter kits include a SCSI “pass through” cable
(three drop) and front panel (CPXCABLESCSI4-F). This cable connects
the MCP750 front panel connector to the SCSI drive mounted in a drive
bay inside the chassis.

CPX2208 cables also include the PMC to panel cable (4.5 inch shielded
ribbon cable) (CPXCABLESCSI5-F).

Other parts shipped with your CPX2208 chassis include:

❏

four - rubber feet, adhesive backed for desktop chassis mounting

❏

eight - Phillips head screws for rack mounting the chassis

❏

power cord - Refer to

Table 3-5

for power cord information

❏

one - Y cable for keyboard and mouse connection

CPX2408 Cables

Cable set (CPVCABLE-2) ships with your CPX2408 chassis. It includes
one Y-cable for keyboard and mouse connection.

Other parts shipped with your CPX2408 chassis include:

❏

four - rubber feet, adhesive backed for desktop chassis mounting

❏

eight - Phillips head screws for rack mounting the chassis

❏

AC power cord - Refer to

Table 3-5

for AC power cord information.

Содержание CompactPCI CPX2000 Series









































































































































Результаты поиска

Содержание CompactPCI CPX2000 Series

Отзывы:

Motorola CompactPCI CPX2000 Series, Инструкция по установке и справочник, Страница: 54 / 136

Результаты поиска

Содержание CompactPCI CPX2000 Series

Отзывы: