12
Using Your Digital Audio Baby Monitor
3. Using Your Digital Audio Baby Monitor
Please read these instructions carefully, and be aware that this digital audio baby
monitor is only intended as an aid. It is not a substitute for responsible and proper
adult supervision.
3.1
Power on or off the baby unit
• Press and hold
to power on the baby unit. The Power/Link indicator turns
on.
• Press and hold
again to power off the baby unit. The Power/Link indicator
turns off.
3.2
Power on or off the parent unit
• Press and hold
to power on the parent unit. The Power/Link indicator
turns on.
• Press and hold
again to power off the parent unit. The Power/Link
indicator turns off.
NOTE
If you place the parent and baby units too close together, you may hear a high
pitched noise. This is not a fault. The units are designed to be operated at some
distance apart, e.g. in separate rooms, so move the units further apart.
If the Power/Link indicator flashes on the baby unit or parent unit, they are not
linked to each other. Make sure that both units are powered on, and reduce the
distance between the units, but not closer than 3 feet.
3.3
Adjust speaker volume of the parent unit
You can adjust the speaker volume from Volume 1 to Volume 3, or turn it off.
• Press
or
on the parent unit when it is not in use.
The sound level indicator lights up when you adjust the speaker volume.
The number of LED lights indicate how loud the volume has been raised.
