Motorola CA50 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 542

Motorola CA50 Скачать руководство пользователя страница 66

4 - 18 CA50/UCA Client & Server Developer & User Guide

Waking the CA50

When the device is in sleep mode (suspended), wake the device by pressing any key.

Accessing the CA Menu

To access the CA Menu when an application and/or network settings are already loaded on a CA50, for example
after the CA50 is deployed in a store environment:

1.

Warm boot the device: Press and hold the Mute and Scan/Select (S) keys simultaneously (for button
locations, see

) until a blank screen displays. Release the buttons while the red LEDs are flashing.

This takes approximately 3 seconds.

2.

IMMEDIATELY WHILE THE RED LED IS STILL FLASHING, press and hold the left soft key until the CA Menu
screen displays. DO NOT RELEASE the left soft key until the CA Menu displays and remains on the display for
5 seconds.

For details about the CA Menu, see

CA Menu on page 3-12

.

«
...
64
65
66
67
68
...
»

Содержание CA50































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов