Motorola CA50 Скачать руководство пользователя страница 117

Страница: 117 / 542

UCA Server

6 - 7

UCA Server Requirements and Setup

Minimum Server Hardware Requirements

Recommended UCA server hardware configuration to support up to a 50 device (CA50) deployment:

•

CPU: 3 GHz Pentium 4 Processor

•

RAM: 2 GB

•

Hard drive: Minimum 10 GB free disk space

Server Software Requirements.

The UCA server software must be run on a server operating system that meets the requirements listed below.

Operating System

•

Server Operating System:

•

Demo and Deployment: Microsoft Windows Server 2003 v.6.0 SP1 (This Operating System is required
for site deployments.)

•

Demo only: Microsoft Windows XP Pro SP2 v.5.1 (This Operating System is for demonstration purposes
only.)

NOTE

Server hardware is not available from Motorola and must be purchased separately.

IMPORTANT

The recommended UCA server hardware configuration listed above is an estimate and should be
tested based on usage needs.

NOTE

The UCA server must be set to a static IP address or a DNS resolvable host name to allow
communication from CA50 devices.

NOTE

1. Windows XP Pro lacks a DHCP server.

2. By default Windows XP Pro IIS is limited to 10 connections (mobile devices).

Содержание CA50































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CA50

Отзывы:

Motorola CA50, Руководство для разработчиков и пользователей, Страница: 117 / 542

Результаты поиска

Содержание CA50

Отзывы: