A
BRAVO
Encore!
Numeric Display Pager
Operating
Instructions
Turning Your Pager On:
• Press
W
to turn your pager on. Your pager alerts
indicating that it is on.
The time of day and the “Alert Mode” indicator, silent
(
[
) or audible (
D
), appears on the display.
Receiving and Reading Your Messages:
Your BRAVO
Encore! pager can receive up to eight
20-character messages.
When a message is received, your pager alerts for
eight seconds.
• Press any button to stop the alert.
• Press
W
to display your message.
• Press
V
twice while reading your message to re-
turn to the main status screen.
Messages containing more than 12 characters dis-
play on a second screen. The (
B
) symbol indicates
additional screens. The second screen displays au-
tomatically after one minute, or you can press
W
to
advance to the second screen. The last screen of
your message displays the message slot number
and the time your message was received.
If a message is left unread, the pager emits a re-
minder alert every two minutes, and the number of
unread messages is displayed on the screen (i.e.,
1
page
,
2 pages
).
Turning Your Pager Off:
• Press
X
until the
pager off ?
prompt appears
on the display.
• Press
W
to turn your pager off.
When your pager is turned off, the clock display re-
mains on the screen. The “Alert Mode” indicator
does not.
Turning On the Light:
• Press
V
while the clock or a message is dis-
played to turn on the display light.
• To turn off the light, press
V
again while the mes-
sage or the clock is displayed or allow it to turn off
automatically.
Alarm Indicator
Alert Mode Indicator
Message Time Stamp
Message Slot Number
Message Lock Indicator
Continuous Message Indicator
Alert Light
Backlight/Reset
Button (
)
Menu/Lock
Button
On/Read/Select
Button
Battery Door
Lock (Slide up
to unlock,
down to lock)
Slide Battery Door to Right
(Insert Positive End of Battery First)
Changing Alert Modes:
• Press
X
. Either
silent ?
or
audio ?
appears,
depending on the current mode. For your pager
to vibrate, it must be in the “Silent” mode.
• To change the alert mode, press
W
while your
choice appears on the display.
Setting the Clock:
• Press
X
until
set time ?
appears.
• Press
W
to set your pager’s clock.
• Press
X
until the desired hour appears. To move
to the next digit, press
W
. Repeat this process for
each field (hours, minutes, AM/PM).
• Press
V
twice to return to the main status screen.
Setting the Alarm:
• Press
X
until
set alarm ?
appears on the display.
• Press
W
to select the alarm on/off sequence.
• Press
X
to turn on or turn off the alarm. To move
to the next digit, press
W
. To advance through
each digit press
X
. Repeat this process for each
field (On/Off, hours, minutes, AM/PM).
• Press
V
twice to return to the main status screen.
The (
\
) indicator appears on the display when the
alarm is turned on. At the selected time, the alarm
vibrates or emits a unique 20-second alert, and
alarm
appears on the display.
• Press any button to stop the alarm alert.
A set alarm activates even when your pager is off.
Locking Messages:
• To lock a message, press
X
while reading your
message. A lock (
E
) appears on the display to in-
dicate that your message is protected.
• To unlock your message, press
X
while reading
the locked message.
