BLACK
PANTONE 285
http://www.motorola.com/mt2070
MT20X0 Poster
SYMBOL MT2000 Series
MT20X0 Poster
http://www.motorola.com/mt2090
1
2
1
2
9
10
7
6
3
4
5
2
1
13
8
11
12
or
Quick Start Guide
POST IN WORK AREA
POST IN WORK AREA
Table Top Cradle Insertion
NOTE: Cables may vary depending on configuration. When using an external power supply, insert the
cable into the cradle first, then insert host cable. Connect power last.
IBM 46XX
USB
RS-232
Cradle Cable Connections
MT20X0 Cable Connection
Keyboard Wedge
No power to scanner
Check battery
End cap not secured correctly
Turn end cap to secure
Scanner not working
Bar code unreadable
Ensure bar code is not defaced;
try scanning test bar code of same
bar code type
Scanner not programmed
for bar code type
Ensure scanner is programmed
to read type of bar code being
scanned
Scanner not decoding bar code
Scanner not paired to host-connected cradle
Pair the scanner to the cradle (using the
PAIR bar code on the cradle)
Cradle not programmed for correct host interface
Check scanner host parameters or
edit options
Interface cable is loose
Check for loose cable
connections
Scanner decoding bar code, but data not transmitting to host
Paired cradle host communication parameters do not match the host’s parameters
Check cradle host parameters or edit options
Scanned data incorrectly displayed on host
Set Defaults
Note: The scanner connection to the cradle
is dissolved when Set Defaults is scanned.
RS-232 Host Types
Keyboard Wedge Host Types
USB Host Types
IBM 46XX Host Types
Radio Communications Host Types
SET DEFAULTS
HID KEYBOARD EMULATION
IBM HAND-HELD USB
PORT 5B
PORT 9B
STANDARD RS-232
ICL RS-232
NIXDORF RS-232 MODE A
Unpairing/Disconnection
UNPAIR/DISCONNECT
Scan to Add Prefix/Suffix Values
(Carriage Return/Line Feed)
SCAN OPTIONS
<DATA><SUFFIX>
ENTER
NIXDORF RS-232 MODE B
FUJITSU RS-232
OPOS/JPOS
IBM PC/AT and IBM PC COMPATIBLE
Please refer to the Symbol MT20X0 Product Reference Guide Troubleshooting section for further information.
If data is still not transmitting to host, it may be necessary to recycle power on the cradle.
Host
or
Power
See Product Reference Guide for more information
CRADLE HOST
SERIAL PORT PROFILE (SLAVE)
BLUETOOTH KEYBOARD EMULATION (HID SLAVE)
SERIAL PORT PROFILE (MASTER)
TROUBLESHOOTING
SYMBOL MT20x0 PROGRAMMING BAR CODES
Host Types
Unpairing/Disconnection
UNPAIR/DISCONNECT
Host Mode
Miscellaneous
WIRELESS ONLY
CABLE PRIORITY
CABLE ONLY
1
Left soft key
2
Tab - * key
3
Keypad
4
Orange key
5
Blue key
6
Battery
7
Tether Plate
8
LED Indicators
9
Scan Window
10
Navigation - ALT - CTRL key
11
Cold boot trigger
12
Enter key
13
Scan Trigger
BATTERY INSERTION
CONNECTIONS
BATTERY REMOVAL
HOST INTERFACES
DRAFT
