• Press the preprogrammed
Status
button.
•
or to
Sts
and press the
Menu Select
button
directly below
Sts
.
The display shows the last acknowledged status call,
or the first status in the list.
2
Perform one of the following actions:
•
or
to the required status.
• Use the
keypad
to enter a number corresponding
to the location in the status list.
3
Press the
PTT
button to send the status.
When the dispatcher acknowledges, you hear four
tones and the display shows
Ack received
. The
radio returns to normal dispatch operation.
If no acknowledgment is received, you hear a low-
pitched tone and the display shows
No
acknowledge
.
4
Press
to return to the
Home
screen.
Making a Priority Dispatch Calls
If a talkgroup is congested, the Priority Dispatch feature
allows you to call the dispatcher on a different talkgroup.
This talkgroup is called the Priority Talkgroup. Each
trunking talkgroup can have its own assigned Priority
Talkgroup.Priority Dispatch is not available during
Emergency operations. Scan feature is suspended when
Priority Dispatch is initiated.
Dispatch console that supports this feature must be
preprogrammed to use this feature. Check with your dealer
or system administrator for more information on dispatch
console supporting this feature.
1
Press the preprogrammed
Priority Dispatch
button.
A tone sounds and the radio enters Priority Dispatch
mode. The radio exits this mode when the Priority
Dispatch Time Out Timer expires.
2
Before the Priority Dispatch Time Out Timer expires,
press and hold the
PTT
button to transmit.
The display shows the Priority Talkgroup alias.
English
54
