Chapter 13
Scan
This feature allows you to monitor traffic on different channels by scanning a programmed list of
channels. Scanning is halted if you initiate a call and resumes when the call has ended.
13.1
Turning Scan On or Off
Procedure:
Turn scan on or off by pressing the
Scan
menu item.
If the scan is enabled, the display shows
Scan On
and the
Scan
status icon.
If the scan is disabled, the display shows
Scan Off
.
13.2
Making Dynamic Priority Change (Conventional Scan Only)
Procedure:
1
Identify a new channel as a Priority-Two channel.
2
Press the programmed
Dynamic Priority
button.
The radio continues scanning the remaining channels in the list.
NOTE:
This feature remains in effect, until the scan feature is turned off.
13.3
Deleting Nuisance Channel
Procedure:
1
Identify the nuisance channel.
2
Press the
Nuis
menu item.
The radio continues scanning the remaining channels in the list.
NOTE:
This feature is not applicable for priority channels, or the designated transmit channel.
13.4
Restoring Nuisance Channels
Procedure:
Perform one of the following actions:
• Press the programmed
Scan
button to turn off scan and press again to turn on scan
• Change to another channel, and return to the original channel.
MN009203A01-AA
Chapter 13 : Scan
62