4
Long press the preprogrammed Sensor button to
cancel this operation and enable the sensor
notification.
Disabling Holster Sensor Permanently
1
Long-press the preprogrammed
Sensor
button to
disable OTA Sensor notification.
A tone sounds and the radio displays
Sensor Off
.
While in this state, no holster events will be reported
OTA, regardless of how many times the gun is
drawn or re-inserted.
2
Long-press the preprogrammed
Sensor
button
again to enable the OTA Sensor notification.
A tone sounds, and the radio displays
Sensor On
.
The radio generates a bad key tone if the sensor is
not allowed to be disabled.
Over-the-Air Programming (POP 25,
ASTRO 25, and ASTRO
Conventional)
This feature enables configuration data and firmware to be
upgraded to your radio over-the-air. Full use of the radio is
retained during the data transfer without interrupting
communication. For ASTRO 25 and ASTRO Conventional,
the upgrade pauses to give priorities to voice call, and
continues after the voice call ended. For Wi-Fi, the upgrade
process runs concurrently with voice calls.
Once a configuration upgrade is downloaded to your radio,
you can install new changes immediately or delay changes
to be installed on the radio when it is being powered up.
NOTICE:
This feature must be preprogrammed by a qualified
radio technician. Check with your dealer or system
administrator for more information.
Voice Announcement
This feature enables the radio to audibly indicate the
current feature mode, zone or channel the user has just
assigned. This audio indicator can be customized per
customer requirements. This is typically useful when the
English
93