• A tone sounds to indicate the selected channel
does not support emergency and rejects to
launch emergency mode.
2
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3
The microphone remains active for the hot mic time
specified in the radio's codeplug programming.
4
To exit Emergency Call, press and hold the
preprogrammed
Emergency
button.
Sending an Emergency Alarm with
Emergency Call
This feature gives your radio priority access on a channel
for conventional system, and to a talkgroup for trunking
system.
1
Press the preprogrammed
Emergency
button.
If successful, the display shows
EMERGNCY
on the
current zone and channel. You hear a short,
medium-pitched tone and the LED blinks red
momentarily.
The radio exits Emergency Alarm and enters the
Emergency Call state when one of the following
scenarios occur:
• You receive the dispatcher acknowledgment. The
display shows
ACK RCVD
.
• You receive no acknowledgment. The display
shows
NO ACK
.
• You press the
PTT
button while in the Emergency
Alarm mode.
If unsuccessful, you hear the radio sounds a short
low-pitched tone to indicate the selected channel
does not support emergency and rejects to launch
emergency mode.
2
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3
Press and hold the
PTT
button. Speak clearly into
the microphone.
English
63
