Motorola APX 8000 Скачать руководство пользователя страница 56

Страница: 56 / 112

Release the

PTT

button to end the transmission

and wait for a response from the dispatcher.

To exit Emergency Call, press and hold the
preprogrammed

Emergency

button for about a

second.
Turning off the radio also cancels the emergency
state.

Sending a Silent Emergency Alarm

This feature allows you to send an Emergency Alarm
to the system without triggering any audio or visual
indicators.

Press the preprogrammed

Emergency

button.

The display shows no changes, the LED does not
light up, and you hear no tones. The silent
emergency state continues until you perform the
next step.

Perform one of the following actions:

• You press and hold the preprogrammed

Emergency

button for about a second to exit

the Silent Emergency Alarm mode.

• Press and release the

PTT

button to exit the

Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.

Change of Channels during Emergency

For ALL Emergency transmissions, when changing
channels:

• If the new channel is also preprogrammed for

Emergency, you can change channels while in
Emergency operation. The emergency alarm or
call continues on the new channel.

• If the new channel is

NOT

preprogrammed for

Emergency, the display shows

NO EMERG

, and you

hear an invalid tone until you exit the Emergency
state or change to a channel preprogrammed for
Emergency.

Emergency Keep-Alive Feature

This feature, when enabled, prevents the radio from
being turned off via the

On/Off Control Knob

when

the radio is in the Emergency state.

Note

The radio only exits the Emergency state
using one of the ways mentioned in the
previous sections.

Advanced Features

English

Содержание APX 8000

















































































































Результаты поиска

Содержание APX 8000

Отзывы:

Похожие инструкции для APX 8000

Бренды по названию

Популярные бренды

Motorola APX 8000, Руководство пользователя

Результаты поиска

Содержание APX 8000

Отзывы:

Похожие инструкции для APX 8000

Бренды по названию

Популярные бренды