manualshive.com logo in svg

Motorola APX 4000, Руководство пользователя, Страница: 85 / 175

Поделиться
Скачать
Motorola APX 4000 Скачать руководство пользователя страница 85

If the call alert page is sent successfully, you

hear a tone and the display shows 

Ack

received

. The radio returns to the Home

screen.
If the call alert page is not acknowledged, you

hear a low tone and the display shows 

No

acknowledge

. Press the 

Menu Select

 button

directly below 

Ok

 to return to the main screen of

Contacts

.

Emergency Operation

The Emergency feature is used to indicate a critical

situation.
If the 

Top (Orange)

 button is preprogrammed to send

an emergency signal, this signal overrides any other

communication over the selected channel.
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm

Check with your dealer or system administrator for

more information on the programming of this feature.
Only 

one

 of the Emergency modes above can be

assigned to the preprogrammed 

Emergency

 button.

Note: 

To exit emergency at any time, press and hold

the preprogrammed Emergency button for about a

second.
The radio operates in the normal dispatch manner

while in Emergency Call, except if enabled, it returns

to one of the following:

Tactical/Non-

Revert

The radio sends emergency

alarm and/or make emergency

call on the current selected

channel.

Non-Tactical/

Revert for

Conventional

system

The radio reverts to the

preprogrammed emergency

channel to send alarm and/or

make emergency call.

Non-Tactical/

Revert for

Trunking system

The radio reverts to the

preprogrammed emergency

talkgroup to send alarm and/or

make emergency call.

Advanced Features

81

English

Содержание APX 4000
















































































































































































Отзывы:

Нет отзывов