manualshive.com logo in svg

Motorola APX 4000, Руководство пользователя, Страница: 155 / 175

Поделиться
Скачать
Motorola APX 4000 Скачать руководство пользователя страница 155

connectors, controls or crevices. Dry the radio

thoroughly with a soft, lint-free cloth.

3

Clean battery contacts with a lint-free cloth to

remove dirt or grease.

Preparation for Washing the Radio and Parts

You can detach the battery and Universal Connector

Cover of the radio and have them and the radio

brushed and washed with detergent and water.
Prepare the following material, apparatus or

equipment before you begin washing the radio and

parts.
• A bucket of tap water (water height must be at

least 2 inches higher than radio height).

• A bucket of 0.5% liquid detergent solution (1

teaspoon of recommended liquid detergent to 1

gallon of water or 1 part recommended liquid

detergent to 200 parts water; water height must be

at least 2 inches higher than radio height).

• A small brush
• A toothbrush
• Source of running water
• Drying towel

Proper Ways to Handle the Radio

• Do 

not

 pound, drop, or throw the radio

unnecessarily. Never carry the radio by the

antenna.

• Avoid subjecting the radio to an excess of liquids.
• Do not submerge the radio.
• Avoid subjecting the radio to corrosives, solvents

or chemicals.

• Do 

not

 disassemble the radio.

• Keep the accessory-connector cover in place until

ready to use the connector. Replace the cover

immediately once the accessory has been

disconnected.

• When charging the radio using a wall mounted

charger, the radio must be turned off. Otherwise,

the Man Down Alert and Emergency may be

accidentally triggered.

Radio Service and Repair

Proper repair and maintenance procedures will

assure efficient operation and long life for this

product. A Motorola maintenance agreement will

provide expert service to keep this and all other

communication equipment in perfect operating

condition. A nationwide service organization is

Helpful Tips

151

English

Содержание APX 4000
















































































































































































Отзывы:

Нет отзывов