manualshive.com logo in svg

Motorola APX 3000, Руководство пользователя

Поделиться
Скачать
Motorola APX 3000 Скачать руководство пользователя страница 61

• If the timer expires without an event, a tone sounds, the radio switches the sensor to enabled

state, and clears the sensor status from the display.

• If the preprogrammed 

Sensor

 button is long-pressed, the OTA sensor notification is enabled.

7.15.2.2.2

Disabling the Sensor Permanently

Procedure:

1

Long-press the preprogrammed 

Sensor

 button to permanently disable the sensors.

A tone sounds and the radio displays 

Sensor Off

. While in this state, no events is reported

over-the-air (OTA), regardless of how many times the gun is drawn, re-inserted or weapon is
fired.

The radio generates a bad key tone if the sensor is not allowed to be disabled or there is
no sensor connected to the radio when the preprogrammed button or menu select button is
pressed.

2

Long-press the preprogrammed 

Sensor

 button again to enable the OTA Sensor notification.

A tone sounds, and the radio displays 

SNSR OFF

.

7.16

ASTRO 25 (P25) Programming Over Project 25 (POP25)

Also called Over-the-Air Programming, this feature allows configuration data and firmware to be
upgraded to your radio over-the-air. Full use of the radio is retained during the data transfer without
interrupting communication.

If the upgrade happens on the ASTRO 25 and ASTRO Conventional systems, the upgrade pauses to
give priorities to voice call, and continues after the voice call ended. If the upgrade happens on a Wi-Fi
network, the upgrade process runs concurrently with voice calls.

Once a configuration upgrade is downloaded to your radio, you can install new changes immediately or
delay changes to be installed on the radio when it is being powered up.

7.17

Voice Announcement †

This feature enables the radio to audibly indicate the current feature mode, zone, or channel assigned
to the user.

The available voice announcement (VA) priority options are:

High

Voice announcement is enabled even when the radio is receiving calls.

Low

Voice announcement is disabled when the radio is receiving calls.

68012007043-EM

Chapter 7 :  Advanced Features

  61

Содержание APX 3000



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды