Motorola APX 2000, Руководство пользователя

Страница: 66 / 206

General Radio Operation
Selecting a Zone
Your radio must be preprogrammed to allow you to
use this feature.
A zone is a group of channels. The following methods
are options on how to select a radio zone. The result
of all the methods is the same. You can use the
options interchangeably depending on your
preference and the programmed functions.
• Select a zone via the radio menu
Zone
:
a)
or to
Zone
and press the Menu Select
button directly below
Zone
.
b) or to the required zone, or use the
keypad to enter the zone number.
If the zone number entered is unprogrammed,
the display shows
Invalid entry
. Repeat this
step.
c) Press the Menu Select button directly below
Sel
to confirm the displayed zone.
d) Press the PTT button to transmit on the
displayed zone channel.
•
Turn the preprogrammed Zone Change MFK
to the required zone.
If
Mode Change is secondary feature of the MFK ,
press the MFK once to toggle to Zone Change
MFK then only select the required zone.
• Select a zone via the radio menu
ZnUp
or
ZnDn
:
a)
or to
ZnUp
or
ZnDn
.
b) Press and hold the Menu Select button directly
below
ZnUp
or
ZnDn
until the required zone
appears.
Positions of
ZnUp
and
ZnDn
on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
c) Press the PTT button to transmit on the
displayed zone channel.
Selecting a Radio Channel
A channel is a group of radio characteristics, such as
transmit/ receive frequency pairs. The following
methods are options on how to select a radio
channel. The result of all the methods is the same.
General Radio Operation
62
English