Motorola APX 1000 Скачать руководство пользователя | Manualshive

Страница: 46 / 136

background image

Phone Call Displays and Alerts

The following phone call displays and alerts appears on the radio display when you make and receive
Phone calls. The radio also uses alert tones to indicate the current status.

You Hear

You See

When

Notes

A Long
Tone

No phone

You press the PTT
button and the phone
system is not availa-
ble.

Press

to hang up. The radio re-

turns to the Home screen.

Phone
busy

The phone system is
busy.

Press

to exit the phone mode and

try your call later.

A Busy
Tone

Phone
busy

When a channel is not
available.

The radio automatically connects
when a channel opens.

–

No ac-
knowledge

The call is not ac-
knowledged.

Press

to hang up. The radio re-

turns to the Home screen.

A High-
Pitched
Tone

–

When you release the
PTT button.

The radio indicates to the landline par-
ty that the caller may begin talking.

NOTICE:

You have the option of sending additional digits (overdial), such as an extension

number, credit card, or PIN numbers to the phone system. If the radio is preprogrammed for live
overdial, every digit entered after the call is connected, is sent to the phone system.
If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory
and then sent when the

PTT

button is pressed. Press the

PTT

button to send either digits or

voice, but not both at the same time.

Display Color Change On Channel

This feature provides visual channel identification where users are able to have a quick visual
recognition of being on a particular channel.

Your radio must be preprogrammed to allow you to use this feature.

When changing channels, the radio backlight on top lightbar indicator and accessories (DRSM)
changes to the preprogrammed color.

The backlight on top lightbar indicator turns off and if connected to DRSM, the DRSM backlight
changes to white for the following scenarios:

• When changing to or powering up on an invalid channels such as unprogrammed channels,

receiver frequency error channel and blank channels

For hard key zeroize, key loading, and scan list programming, the backlight follows the home channel
backlight color.

HAZLOC Battery Type Detection

This feature alerts the user when there is a HAZLOC certification mismatch between the radio and the
battery. This feature supports IMPRES batteries only.

During power up, if there is a mismatch, the following scenarios occurs:

• The radio repetitively displays

Wrong Battery

with red intelligent backlight

MN000255A01-BL
Status Indicators

46

«
...
44
45
46
47
48
...
»

Содержание APX 1000









































































































































Отзывы:

Нет отзывов

Похожие инструкции для APX 1000

Бренд: Rapid Страницы: 2

Бренд: RACOM Страницы: 16

Бренд: Navman Страницы: 52

Бренд: S&C Страницы: 8

Бренд: S&C Страницы: 52

Бренд: S&C Страницы: 16

Бренд: Palsonic Страницы: 5

Бренд: G-RF Страницы: 6

Бренд: Simoco Страницы: 50

Бренд: E.F. Johnson Company Страницы: 56

Бренд: Sandstrom Страницы: 32

Бренд: Garmin Страницы: 133

Бренд: C. Crane Страницы: 2

Бренд: Radio Shack Страницы: 16

CC Solar Observer

Бренд: C. Crane Страницы: 16

Бренд: SAL Страницы: 16

Бренд: Oricom Страницы: 29

Бренд: Kirisun Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды