Motorola APX 1000 MODEL 3 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 162

Motorola APX 1000 MODEL 3 Скачать руководство пользователя страница 45

Indicates that the text entry is currently
in uppercase and with predicted words
shown at the bottom of the screen.

Text Messaging Service (TMS) Indicators

This feature allows you to send and receive text
messages. Status icons and menu options shown
here help you to work more efficiently with TMS
feature. See

Text Messaging Service (TMS)

on page

87 for more information.

TMS Status Icons

The following icons appear on the radio’s display
when you send and receive text messages.

Inbox Full

The Inbox is full.

Message Sent

The text message is sent successfully.

Message Unsent

The text message cannot be sent.

Unread Message

• User receives a new message.
• The selected text message in the Inbox

has not been read.

Read Message

The selected text message in the Inbox
has been read.

Normal Message

User is composing a message with normal
priority and without a request for a reply.

Message Index

Indicates the index of the current message
the user is viewing.

Example: If the user is looking at the third
message out of a total of 6 messages in
the Inbox folder, the icon is displayed as
the icon on the left column.

Identifying Status Indicators

41

English

«
...
43
44
45
46
47
...
»

Содержание APX 1000 MODEL 3



































































































































































Отзывы:

Нет отзывов