Motorola solutions MCC 7100 IP, Руководство по установке и эксплуатации

Страница: 137 / 170

Control Panel Button
When the Audio Outputs tab, the Audio Inputs tab, or the USB AIM tab is selected, selecting
Control Panel
opens the Window
Sound
panel. When the
PTT/Monitor
tab is selected, selecting
Control Panel
opens the
Game Controller
window. The default audio devices currently configured in
the Windows operating system are shown both in the Sound panel and in the Peripheral Configuration
Tool.
Figure 25: Sound and Game Controller in the Windows operating system
The
Playback
and
Recording
tabs in the
Sound
panel are similar to the
Audio Outputs
and
Audio
Inputs
tabs in the Peripheral Configuration Tool, respectively. The only difference is that only one
speaker is shown in the Sound panel whereas two speakers are shown and configurable in the
Peripheral Configuration Tool. This separation of speakers allows each speaker to be treated as a
separate channel for use by the Elite Dispatch.
NOTICE:
To prevent speakers or microphones configured in the Windows operating system
from appearing in the
Audio Outputs
and
Audio Inputs
tabs of the Peripheral Configuration
Tool, disable them from the Sound panel.
Motorola Peripherals – Audio Gain
It is important to adjust the audio gain for the peripherals so that the communication can be effective.
Adjust the audio gain for all the Motorola peripherals:
• External Telephone Interface
• Local Logging Recorder
• External Paging Encoder
• Two pairs of the Motorola headsets
• Motorola desktop microphone
The Motorola peripherals are connected to the USB Audio Interface Module (USB AIM) device.
MN000672A01-E
Chapter 5: Console Dispatch Status and Peripheral Configuration Tool
Send Feedback 137