Note: Do not close your browser window until the download is complete or the file may not download
correctly. This is important if you are downloading multiple video files because the files are downloaded one
by one.
Deleting Recorded Video
As the SD card becomes full, the camera automatically starts overwriting the oldest recorded video. You can also
choose to manually delete video to make room for new recordings.
On the Storage page, you can choose to delete video in the following ways:
l
To delete individual video files, select all of the files you want to delete from the Recordings list then click
Delete.
l
To delete all of the recorded video files, click Format Card to format the SD card.
Digital Inputs and Outputs
On the Digital Inputs and Outputs page, you can set up the external input and output devices that are connected to
the camera. This option does not appear for cameras that do not support digital inputs and outputs.
1. To configure a digital input:
a. In the Digital Inputs area, enter a name for the digital input in the Name field.
b. Select the appropriate state from the Circuit State drop-down list. The options are:
l
Normally Open
l
Normally Closed
c. Click Apply to save your changes.
Once the digital input is connected to the camera, you will see the connection status in the Circuit
Current State area. The status is typically
Open
or
Closed
.
2. To configure a digital output:
a. In the Digital Outputs area, enter a name for the digital output in the Name field.
b. Select the appropriate state from the Circuit State drop-down list.
c. Check the IRCF to Out box to allow the camera's IR Cut Filter to control the external output.
This feature is typically used when the camera is connected to an external IR illuminator. Once enabled,
the IR illuminator is turned on when the camera's IR Cut Filter is in monochrome mode.
d. In the Duration field, enter how long the digital output is active for when triggered. You can enter any
number between 100 and 86,400,000 milliseconds.
e. Click Trigger to manually trigger the digital output from the web interface.
f. Click Apply to save your changes.
Deleting Recorded Video
27
