Total record time estimate is based on constant recording
The retention time is determined by the
Max. Record Time
setting and the average camera data rate. Since the
system can only provide an estimate of the data rate for the full retention period, the actual retention time may
exceed the Max. Record Time setting by 5 minutes.
NOTE:
The time shown in the Total Record Time column is an estimate only.
1. In the server Setup tab, click
.
The Recording and Bandwidth dialog box is displayed.
The Data Aging column shows an estimate of the recording time that is available at each image rate,
given the amount of space on the recording device.
2. In the Data Aging column, move the sliders to adjust the amount of time video is stored at each image
rate.
l
To change the data aging settings for all linked cameras, move the slider for one linked camera
and all linked cameras will be updated.
l
To change the data aging setting for one camera, break the camera's link to other cameras by
clicking the
icon to the left of its name, then make your changes.
3. In the
Max. Record Time
column, manually enter a maximum record time or select one of the options from
the drop-down list for each camera.
NOTE:
If the time estimated in the Total Record Time column is significantly shorter than what is set in the
Max. Record Time column, the camera's actual recording time will be closer to the Total Record Time
estimate.
4. Click
OK
.
Adding Users and Groups
If there will be other people using the system, you may want to add them as separate users rather than giving
them access through the default administrator account.
Before you can add individual users, you will need to add permission groups that define what users have access
to. By default, the system has the following groups:
l
Administrators
— has access to everything in the system.
l
Power Users
— has access to most features in the system except for the ability to import and export
settings.
l
Restricted Users
— has access to live video only and can control audio and digital outputs.
l
Standard Users
— has access to live and recorded video, but cannot make any Setup changes.
It is highly recommended that the Administrators group includes at least two users. In the event one
administrator user forgets the default administrator password, the second administrator user can be used to
reset the password. If you do not have a second administrator user, you may need to completely reset the
system.
Adding Users and Groups
12
