MotorGuide Xi3 Wireless Edition, Руководство по эксплуатации, обслуживанию и установке, Страница: 36 / 45

IMPORTANT: Do not paint the anode or clean it with steel wool, sandpaper,
wire brushes, or other abrasive materials. Replace the anode if it is more than
50% eroded.
a - Propeller
b - Anode (saltwater models
only)
c - Washer
d - Propeller nut
Propeller Replacement
!
WARNING
Performing service or maintenance without first disconnecting the battery can
cause product damage, personal injury, or death due to fire, explosion,
electrical shock, or unexpected motor starting. Always disconnect the battery
cables from the battery before maintaining, servicing, installing, or removing
motor components.
REMOVING THE PROPELLER
1. Disconnect the power cables from the battery.
2. While holding the propeller blade with one gloved hand, use a 9/16 in.
wrench or a ratchet to remove the propeller nut. Remove the propeller nut
and washer (or anode, for saltwater models).
IMPORTANT: Remove the propeller nut with a wrench or a ratchet and socket.
Using another tool may damage the propeller nut or shaft. If the propeller
cannot be removed easily, use a rubber mallet to lightly tap the back side of
the opposite blade. If the propeller cannot be removed, have the propeller
removed by an authorized dealer.
a
b
c
d
62099
MAINTENANCE AND STORAGE
30
eng