3.2 Mounting Procedures for MOTOPOS Baseplate
3-3
HS0481357
HS0481357
3.2.1
In Case of Installing the MOTOPOS and Manipulator
on a Common Baseplate
The baseplate should be rugged and durable to ensure that the MOTOPOS and the manipula-
tor are in the correct relative position. Thickness of the baseplate and the size of the mounting
anchor bolts should meet the recommendations in the manual for the manipulator to be com-
bined.
Mount the MOTOPOS base securely with four hexagon head screws M20 (recommended
length: 70 mm). Tighten the screws and anchor bolts securely so that they will not work loose
during the operation.
Fig. 3 Mounting the MOTOPOS Baseplate on the Common Base
Flatness :
0.5 mm or less
Units: mm
30 mm
Spring Washer
Washer
Hexagon head screw M20
(4 screws)
Common baseplate
MOTOPOS base
