An easy method for finding out if the sensor is operating correctly is to use the Sensor
Status check. The test checks the signals from the sensor and indicates high and low in
the circles. Make sure all the signals toggle when you rotate the motor shaft with your
thumb.
Supply Voltage
To find the supply voltage this menu is useful. As you can see the connected battery is not
fully charged.
System Information
Serial:
Serial number of the device.
Date:
Production date.
Build:
Current firmware build running in the device.
This information is important to provide in cases of contact with support or discussing
features with others.
Current Test
When the Current Test is started a splash screen is shown asking you to wait for the test to
complete. Then you will be automatically redirected to the results, that display information
about the test. Step amongst the menu items with the UP/DOWN buttons.
2014-10-05 [Ver 1.2]
www.motolyser.com
3/6
