MOTO GUZZI V85 E4, Руководство по обслуживанию станции

Страница: 43 / 108

•
After inserting all the internal compo-
nents, apply a layer of threebond
1207B on the junction surface of the
two crankcasings.
•
Position the gearbox cover and man-
ually tighten the gearbox fixing screw
on the cardan side.
•
Insert the 12 fixing screws of the gear-
box, engine side and then tighten them
to the prescribed torque, including the
screw opposite the cardan side previ-
ously tightened manually.
•
After inserting the two half-cones (1) on
the thrust plate (2), insert it on the
clutch shaft working from the cardan
side and paying attention to the orien-
tation, as the machining must push on
the cap once the reassembling of the
gearbox on the engine is complete.
Engine V85 E4
Engine
ENG - 43