2
R001 Safety and Regulatory Guide
English
This document contains regulatory, precautionary, and
recycling information for the Motion R001 Tablet PC. To
avoid injury, read this document and understand its
contents before you use the Tablet PC. Keep this document
nearby, so you can refer to it later.
For detailed operating instructions and safety information,
see
www.motioncomputing.com/us/support/userdocs
.
The Motion Tablet PC model R001 is marketed and/or
known as the R12.
Note:
The Motion Tablet PC model R001 is compliant to the
UL 60950-1, 2nd ed., CSA 22.2 No. 60950-1-07 and IEC/
EN60950-1:2006+A12:2011 Safety Standard for
Information Technology Equipment.
Symbol description
The following symbols may appear on the products or
accessories.
Specifications
Product safety information
Motion Tablet PCs are designed to optimize safety,
minimize strain, and withstand the rigors of portability.
However, to further reduce the risk of injury or damage to
the unit, you should observe certain precautions.
Mounting and installation disclaimer
Motion Computing shall not be liable under any theory of
liability (including, without limitation, contract, tort, or
statutory law) for any loss, damage, personal injury, or
other damage of any nature (including, without limitation,
direct, special, incidental, or consequential damages)
arising directly or indirectly as a result of improper or
inappropriate placement, installation, or use of its products
or any other application. To safely install and use Motion
products, full consideration of occupants, systems (e.g., the
location of fuel lines, navigation systems, brakes lines,
electrical, drive train or other systems), air-bags and other
back-up, warning, or safety equipment is required. Without
limiting the foregoing, Motion specifically disclaims any
responsibility for the placement, use, or installation of its
products not consistent with (i) the original manufacturer’s
or governmental or regulatory specifications and
recommendations for the environment where the products
will be placed, used, or installed, (ii) Motion written product
instruction sheets, or (iii) workmanship standards.
Federal Communications
Commission
Compliance with Nemko CCL
for general product safety in
accordance with UL 60950-1
(ITE) and CAN/CSA C22.2
No. 60950-1 (ITE)
Canada Interference-Causing
Equipment Standard #3 Class
B devices
Compliance with R&TTE
Directive 1999/5/EC for radio
frequency devices
Conformité Européne;
compliance to EMC and Low
Voltage Directives of the
European Union
Product complies with 2002/
96/EC
Compliance with the
Independent
Communications Authority
of South Africa
Compliance with Australian
and New Zealand EMC, EMR,
Radio communication, and
Telecommunication
Standards (A-Tick symbol)
Compliance with the Korea
Certification Commission for
EMC, Safety, and
Telecommunications
Canada ICES-003,Class B
Infocomm Development
Authority for Singapore
Normalizacion Y Certification
Electronica A.C. (NYCE)
Instituto Argentino de
Normalización y Certificación
(IRAM)
Agência Nacional de
Telecomunicações (ANATEL)
On
Off (Storage)
Temperature
5–45° C
0–45° C (with SSD
option)
-20–60° C
Humidity
8–90% RH
5–95% RH
Air pressure
697–1060 hPa
187–1060 hPa
Power supply
(ITE) Delta
Electronics,
SADP-65WH
Rev. BB
Input: 1.5 A, 100–240 VAC, 47–63 Hz
Output: 19 V DC, 3.42 A
The power supply is compliant with
UL 60950-1, CAN/CSA C22.2
No. 60950-1, and IEC/EN 60950-1
NYCE
MR
