AGITO
35 - Setting up
AGITO User Manual OS 5.0 Nova
»
ATTACHING CAMERA MOUNTS
»
V-CON PRO: ATTACHING TO AGITO
🌐
https://motion-impossible.com/how-to-videos/
Place the payload on the rails and align the holes on the sides of the Core
Screw in two 3/8th inch bolts on to either side of the Core using the payload
mounting holes as shown. Make sure these are tight and do not come loose
ALWAYS ENSURE THE PAYLOAD IS PROPERLY AND SECURELY FIXED TO THE
AGITO CORE, USE A MINIMUM OF FOUR FIXTURE POINTS.
ALWAYS TRY TO KEEP THE PAYLOAD OVER THE CENTRE OF THE CHASSIS, ESPECIALLY WHEN OPERATING
AT HIGH SPEEDS. AN ILL-BALANCED LOAD CAN AFFECT HANDLING AND PERFORMANCE.
»
V-CON PRO: ADJUSTMENT AND TUNING
🌐
https://motion-impossible.com/how-to-videos/
Turn the payload adjustment knob on the front of the V-Con PRO to adjust the preload on
the springs. The amount of preload you give depends on the weight of the payload.
Ensure it rests in the middle of the travel. Giving it room to move up and down, as shown below.
Adjust the dampener ring to change the responsiveness of the return
movement. Rougher surfaces generally require a softer return.
TOO HIGH
CORRECT
TOO LOW