AGITO
17 - Operating System
AGITO User Manual OS 5.0 Nova
»
SYSTEM SETTINGS
The system settings screen provides the user with the ability to change the following general configuration / user settings:
CONTROL MAPPING
This menu enables the operator to configure switch functions on the Master Controller.
ITEM
DESCRIPTION
(*denotes default setting)
Function Switch
This option enables user defined functions for the FUNCTION SWITCH
during drive operation.
E-Stop: UP*
setting, the chassis will be in an Emergency Stop while the
switch is in the up position and will only drive when it is changed down.
E-Stop: DOWN
setting, Emergency Stop will be in operation while the
switch is in the down position.
E-Stop: UP/DOWN
setting, Emergency Stop will be in operation when the
switch moves in either direction. The system will automatically revert out of
E-Stop once the chassis has stopped moving.
Steer Mode Switch (Tr)
This option enables user defined functions for the STEER MODE SWITCH
during Trax Mode operation.
Standard
setting maintains Steer Mode Selection in SPORTS mode and no
function in TRAX mode
MAG-Stop Override*
setting enables the operator to override safety limits
when in TRAX mode, by switching to the CRAB position. This setting has no
effect in SPORTS mode.
Free/Film Switch (Sp)
This option enables user defined functions for the FREE / FILM SWITCH
during Sports Mode operation.
Standard*
switches between settings memories
Steering Hold
, see “Steering Hold” on page 42
Pedals Calibrate
Proceed to calibrate pedal dead-band, this is used if motion drift occurs.
Restore Defaults
Resets this menu page to default settings
MEASUREMENT SETTINGS
This menu enables the operator to set the displayed measurement units on the Master Controller and other devices.
ITEM
DESCRIPTION
(*denotes default setting)
Speed
This option enables user defined displayed units of speed.
Km/h:
Kilometres per hour
Mph:
Miles per hour
RPM:
Revolutions per minuet
M/s:
Meters per second
F/s:
Feet per second
Distance
This option enables user defined displayed units of measurement, e.g.
Length of track.
Meters
Cementers
Feet
Inches
Height
This option enables user defined displayed units of measurement, e.g.
Height of Tower.
Meters
Cementers
Feet
Inches
Tower Lens Height
This features enables the user to manually offset the tower height display to
account for the remote head.
+/-
units
Restore Defaults
Resets this menu page to default settings
