Motion Healthcare AE001, Руководство пользователя

Страница: 26 / 36

26
11. BATTERY
CHARGE THE BATTERY
1. The battery can be charged with normal AC
power (AC 110-220 V, 50-60 Hz). The charging
port is located under the front part of the control
panel.
2. Before charging, ensure the wheelchair is
powered off.
3. Plug the charger into the charging port under
the front part of the control panel (Fig. F4), or
unplug the battery and plug the charger into the
charging port of the battery (Fig. F5).
4. Plug another end of the charger into the power
socket. When the red light is on, it indicates that
it is charging. Do not use the wheelchair when
the battery is being charged.
5. When the indicator turns green, keep charging
for additional 30 minutes to allow the battery
to be fully charged. Unplug the charger from
the power outlet before unplugging from the
charging port of the control panel.
6. Please charge the battery in an appropriate
temperature. The recommended ambient
temperature for charging ranges from 5°C to 40°C.
(Fig. G4)
(Fig. G5)
OVER-DISCHARGE PROTECTOR
The lithium battery will be permanently damaged, if the battery’s capacity has been completely
discharged. Therefore, wheelchair is equipped with an over-discharge protector. When the lithium
battery is running out, the protector will cut off the circuit automatically and the controller will
stop working. So the users should be noted that the battery should be charged in time when the
power is displayed in the last grid, otherwise the battery may be scrapped if the battery cannot
be activated by the charger.