Motic SMZ168 Series страница 20 Скачать руководство пользователя

Страница: 20 / 22

* NB. Stains in the field of view may also be attributed to dirt on the inside of the eyepiece. It

is recommended therefore that the lens be cleaned by a recognised service technician.

Mechanical Problems

Problem Cause Solution

Microscope does not stay in
focus

The head drops down

Adjust the tension of the
coarse focus knob

Moving the microscope

●

If possible, avoid moving the stereomicroscope.

●

Carry the stereomicroscope in both hands. One hand should hold the stereomicroscope column

(18), and the other should support it under the base (11).

●

Maintain the stereomicroscope in a vertical position.

Repair

If the stereomicroscope needs repairing by authorised personnel, we recommend that it be stored

in its polystyrene box and returned to the distributor. Attach a note with a description of the

problem.

Warrantee

All Motic microscopes are warranted against any manufacturing defect for a 5 year period.

Damage occurring as the result of any unauthorised repair work, or occurring through misuse or

modification of the microscope will not be included under the conditions of the warrantee. Bulbs

and fuses are not under warrantee.

Содержание SMZ168 Series























Результаты поиска

Содержание SMZ168 Series

Отзывы:

Похожие инструкции для SMZ168 Series

Бренды по названию

Популярные бренды

Motic SMZ168 Series, Инструкция по эксплуатации

Результаты поиска

Содержание SMZ168 Series

Отзывы:

Похожие инструкции для SMZ168 Series

Бренды по названию

Популярные бренды