21
Take Pictures and Videos
2. SWD switch operation on the Controller: When powered
on, the monitor will show the signal which is the
video interface. Put the SWD switch to “2”; it will return to
“1” automatically, and the camera will be recording video.
The icon on the monitor will be . When the icon in the
red square frame is flashing, the camera is recording video.
To stop recording video, put the switch to “2”; it will return
to “1” automatically again. To take pictures, put the switch
to “0”; it will return to middle automatically. When the
icon is displayed on the monitor it means that the
camera has entered picture taking interface. To take a
picture, put the switch to “2”; it will return to middle
automatically. The camera beeper will emit two beeps.
After taking pictures, all the pictures will be stored
in the SD card.
1. Direct operation using camera keys: When powered on,
the monitor will show the signal which is the video
interface. Press the ENT key to take videos. is the
video icon on the monitor. When the icon in the red square
frame is flashing, it means it is recording video. Quickly
press the ENT key again to stop taking videos and store.
Press the mode key when taking pictures. When the icon
changes to it is in the picture taking interface; if you
need to take pictures, press the ENT key. The Controller
will beep twice.
CAMERA
ENT
MODE
MENU
REST
Confirm key
mode selection key
SD card
Menu key
reset key
