Part # 910-850 910-855
-3-
Modified 03/18
Installation Instructions
Figure 5.2
Figure 5.1
6) Mark the position of the camshaft position sensor,
Figure
6.1.
Then remove special retaining bolt with a
12 mm wrench,
Figure 6.2.
Only the bolt needs to be
removed, the sensor can stay in place.
Caution: Due to the retaining bolt being
removed, ignition timing MUST be checked
when installation is completed. Driving with
incorrect ignition timing may result in severe
engine damage!
Figure 6.1
Figure 6.2
7) Remove the temp sensor using a 19mm deep socket.
8) Remove the electrical connector for the Mass Air
Flow Sensor. Loosen the air intake duct and remove
the two 12mm bolts retaining the factor air filter box,
Figure 8.1.
Remove the exhaust manifold heat shield
to gain access to the EGR tube,
Figure 8.2.
Figure 8.1
Figure 8.2
