8
Q-Stress 4.5 System Installation Instructions
Adjustment of top surface height
Follow the instructions below to change the height of the top surface. Be aware that some
of the screws are located in awkward positions. The pictures below show the top surface
changed from the higher to the lower height.
Step
1
Remove the monitor mount by
pulling the mount straight up
and then toward you (make sure
you remove the lock bolt first).
2
1.
Remove the mounting
hardware from the top
surface:
2.
Four screws from the monitor
mount
3.
Two or three screws
(depending on position of
risers) connecting the risers
to the base (these must be
removed from the inside of
the cart.
3
Remove the top surface from the
cart
