The Specialist In Drum Handling Equipment
Models 525-N, 525-T and 525M-T
Vertical-Lift Drum Pourer, Scale-Equipped,
106”, Manual Lift and Tilt
Operator’s Manual for Morse Models 525-N and 525-T
with Serial Number 249855 to ______
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form OM525 (249855-______)
(Updated 12 Jun, 2019 3:06 PM)
2
Safety Information
(continued)
DANGER
- Indicates a situation which, if not avoided,
will
result in serious injury or death.
This signal word is limited to the most extreme situations.
WARNING
- Indicates a situation which, if not avoided,
could
result in serious injury or
death.
CAUTION
- Indicates a situation which, if not avoided, can result in damage to the machine.
CAUTION
-
Do NOT transport with drum raised.
Always lower the drum holder to lowest position before transporting.
DANGER
- Stay well clear of power lines.
Never approach a power line. Current in a high voltage line may arc some distance from the wire to the steel framed,
grounded machine.
WARNING
- The Vertical-Lift Drum Pourer is designed to handle one drum of the types listed at the top of page
3 - Machine Description. DO NOT attempt to handle any other type of drum or object. DO NOT exceed the weight
capacity of 800 Lb. (363 kg).
WARNING
- Level floors only.
For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, ramps, irregular or
debris strewn floors.
WARNING
- Do NOT modify the unit.
Under no circumstances should any modifications be made to the Morse machinery without factory authorization. Any
modifications may void the warranty. This machine was designed to perform a specific job and alterations may result in
injury to operator or machine.
WARNING
- No loose fitting clothing.
Wear close-fitting clothing and safety equipment appropriate to the job. Loose fitting clothing may become caught on
the machinery and cause severe personal injury.
WARNING
- Hydraulic fluid under pressure can be hazardous.
Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury. Avoid the hazard by relieving
pressure before disconnecting hydraulic lines. Keep hands and body away from pinholes and nozzles, which eject fluid
under high pressure. Use a piece of cardboard to search for leaks. If an accident occurs, see a doctor immediately and
inform them of the nature of the accident.
CAUTION
- Wear safety shoes.
Wear safety shoes with non-slip soles and hard toe protection.
WARNING:
This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and
2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the
State of California to cause birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
