background image

53

52

CUL

TIV

A

TOR

EDGER

PRUNING SA

W

HEDGE TRIMMER

BRUSHCUTTER

Sections

Brushcutter

3

Hedge Trimmer

18

Pruning Saw

30

Edger

44

Cultivator

52

 

About This Manual

 
Thank you for purchasing this product. This instruction manual 
describes operating procedures and precautions as well as 
inspection and maintenance procedures for the machine.
Before using this device, read this manual carefully until you are 
familiar with the contents. Carefully observe all warnings and safety 
instructions to ensure correct operation of the machine. Doing so 
will ensure safe operation and optimum performance of the device.
This instruction manual covers the attachments, controls, and 
engine of the Multi-Combination System. Use only attachments 
specified by the manufacturer. Use of any other attachment can 
result in damage to the equipment, possibly leading to death or 
severe injury.
Be sure to strictly observe the important safety information that 
follows each bulleted term below. Failure to follow the instructions 
for correct operation contained herein can result in a severe 
accident.

 DANGER: Indicates that failure to follow the instructions creates  

 

an imminent hazard leading to death orsevere injury.

 WARNING: Indicates that failure to follow the instructions has  

 

the potential to result in death or severe injury.

 CAUTION: Indicates that failure to follow the instructions can   

 

lead to minor injury or severe damage to the machine.

NOTE

   This is an auxiliary explanation that provides useful  

 

 

information and instructions.

Contents

Meaning of pictographs

52

Technical Data

53

Names of Parts

54

Safety Instructions

55

 Ensuing Safe Operation

56

Assembly

57

Wearing the Harness

58

Inspection and Maintenance

59

Troubleshooting

60

Meaning of Pictographs

DANGER - WARNING - CAUTION

Before using this device, read this 
manual carefully until you are familiar 
with the contents.

 

Wear safety gear.
1. Face shield or protective goggles
2. Head protection
3. Ear protection
4. Heavy-duty gloves
5. Non-slip safety shoes

• 

Keep the working end of the 
machine at least 15 m away from 
overhead power lines, telephone 
wires, and all other cables.

• 

Do not operate the device within 
15 meters of a child, animal, or 
bystander.

 

Technical Data - Cultivator

Masses

Unit with specified cutting attachment, empty tank

8.7kg

Cutting Attachment

Type

2 x double blades

Overall length (length to gearbox)

610mm

Effective cut width

300mm

Number of tines

4 x 4

Tilling depth

80mm

External dimensions

Length (Unit & Cultivator)

1610mm

Reduction ratio

38:1

Содержание BC 260 SST


































Отзывы: