26
．
This appliance should not be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have are supervised by the person who is responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance
Save these instructions for future reference
INSTRUCTIONS FOR USE
1.
1)
Before first use, fill the kettle with clean and cold water to its maximum capacity and
boil. Discard the water and repeat this process.
FIRST USE PREPARATION:
2)
The kettle should always be unplugged when filling or adding water.
3)
Fill the kettle with water to the desired level. Do not overfill or there will be a risk of
spillage or spitting. The water level indicator will assist you to measure the correct
amount. You can fill the kettle via the spout or by opening the lid. Do not forget to
close the lid after filling, otherwise the kettle will not automatically switch off once
the water has started boiling.
4)
Do not fill with less than 0.5 liters of water (to “min” indication) to prevent the kettle
from running dry while operating.
5)
Do not fill with more than 1.7 liters of water (to “max” indication).
6)
An automatic safety cut-out has been fitted for protection against overheating, and
will operate if the kettle is switched on while containing insufficient water. Always
ensure the water inside the kettle covers the minimum mark on the water level
indicator gauge. If the automatic safety cut-out has operated, switch the kettle off,
disconnect from the power supply and allow the kettle to cool down for 5 to 10
minutes. Then refill with cold water and switch on and the kettle will operate as
normal.
7)
Once the water has started boiling, the kettle switches off automatically.
a.
Disconnect the kettle from the mains electricity supply.
b.
Do not open the lid when pouring.
c.
If the kettle is overfilled ,boiling water may be ejected.
d.
The kettle is only to be used with the provided stand base.
8)
This appliance is intended to be used for household purposes only.
2.
•
Place the base unit on a dry, smooth and horizontal surface, insert the plug to the
socket. Once the kettle is attached on the base, the power puts through
automatically.
BASIC OPERATION:
•
Press the “
” key shortly, a “Di…” sound shall be heard and the unit will start
operating.
•
Once the water has boiled, the indicator shall turns off and the buzzer will send out a
group “di-di-di” sounds.
3
.
•
Press “
ADVANCED OPERATION:
” for 3 seconds, the buzzer will start to send out “di” sound, The function
of heat insulation will commence. The LED light will be shinning in red color, while
Содержание S1069WK
