Morris CX 8105, Руководство оператора, Страница: 13 / 182

Safety
CX 8105 - Ground Drive December 2016 1-5
Transporting
•
Be aware of the height, length and width of
implement. Make turns carefully and be aware of
obstacles and overhead electrical lines.
• Empty tanks before transporting. Do Not Exceed 20
mph (32 kph) with an empty air cart.
• Use an agricultural tractor that is large enough with
sufficient braking capacity so that the weight of the
loaded equipment towed does not exceed 1.5 times
the weight of the tractor.
• Use flashing amber warning lights, turn signals and
SMV emblems when on public roads.
• Do not transport in poor visibility.
• The slow moving vehicle (SMV) emblem and
reflectors must be secured and be visible on the
machine for transport.
• Avoid soft surfaces, the additional wing weight on
the centre wheels could cause the machine to sink.
• Ensure safety chain is attached correctly to the
towing vehicle and the hitch of the air cart.
• Check that wings are firmly seated in transport wing
stops, and lock pins installed.
• Secure transport locks on depth control cylinders.
• Be familiar with, and adhere to, local laws.
Hydraulics
•
Do not search for high pressure hydraulic leaks
without hand and face protection. A tiny, almost
invisible leak can penetrate skin, thereby requiring
immediate medical attention.
• Use cardboard or wood to detect hydraulic leaks -
never your hands.
• Double check that all is clear before operating
hydraulics.
•
Never remove hydraulic hoses or ends with machine
elevated. Relieve hydraulic pressure before
disconnecting hydraulic hoses or ends.
• Maintain proper hydraulic fluid levels.
• Keep all connectors clean for positive connections.
• Ensure all fittings and hoses are in good condition.
• Do not stand under wings.