4
Steam cleaning floors
IMPORTANT: Before use, hardfloors should be thoroughly swept and carpets should be thoroughly dry
vacuumed. However, we recommend that the steam mop is not used on:
• bare wooden floors or any surfaces where wood is exposed (as it will absorb moisture and may distort).
• damaged hardfloors or hardfloors with gaps present (as it will absorb moisture and may distort).
Also, do not keep the steam mop in one place for an extended period, because the continual heat may
cause damage to carpets and laminate flooring.
Please disconnect and allow the unit to cool before changing cloths.
Assembly
Insert the handle tube
(8)
into the handle slot
(10)
until it clicks into place.
If you wish to remove the handle
(1)
(with the
handle tube), press the handle tube release
button
(11)
and lift the handle and tube out.
1
Attach the micro-fibre floor cloth
(6)
to the
floorhead
(23)
, securing it in place by tightening
the toggle
(5)
.
NOTE: Please ensure the unit is switched off
and has cooled down before attempting to
adjust or remove cloths.
If cleaning carpet, rest the floorhead
(23)
with
the micro-fibre floor cloth
(6)
attached into the
carpet glider
(7)
to make it easier to move the
floorhead across the carpet.
NOTE: The carpet glider is designed to make it
easier to move the floorhead across the carpet
and is intentionally a loose fit on the floorhead.
1
2
2
Insert the floorhead
(23)
onto the main body
(20)
by aligning the floorhead neck
(21)
onto the
steam outlet on the base on the main body. Push
on firmly until it clicks into place.
If you wish to remove the floorhead, press the
floorhead release button
(22)
and pull the
floorhead away.
VC720505MUK Rev1_Instruction Book 07/11/2013 09:54 Page 4
