Morita AdvErL EVO, Инструкция по эксплуатации, Страница: 35 / 76

Instructions for Use 2018-10-22 33
6) Moving the Unit
(1) Hang up the foot switch.
(2) Push the handpiece hanger back and put the handpiece in it.
1. Push down the ring on the joint.
2. Push the hanger back.
(3) Grip the handle to move the unit.
♦ Do not leave the handpiece in the hanger to push the hanger
back; it could fall out.
♦ Remove the tip before moving the unit; it could get broken.
♦
Never push or pull on the hollow waveguide support or the
handpiece hanger.
Risk of overbalance;
•
Do not push side of the equipment to prevent any
unwanted movement.
• In transport position lock the front casters and lock
rear wheel by using the wheel locking device.
•
When passing over threshold, go from backside first.
• Push rear end first to go over bumps.
Peg