P-24 DOOR INTERLOCK FUNCTION
5-1-1
Door Unlock Switch (Manual Door Type)
The DOOR UNLOCK switch, provided on the operation
panel, is used to release the door lock device.
1.
The door cannot be opened unless the door
lock is released.
2.
Switch configuration may differ depending
on the machine.
3.
With the automatic door type machine, this
switch has no function even when it is
pressed.
5-1-2
Interlock when the Door Is Unlocked (Manual Door Type)
The door cannot be unlocked even when the DOOR UNLOCK switch is pressed under the
following status.
1.
While the spindle (rotary tool spindle) is rotating
2.
During automatic operation
3.
During turret head indexing
4.
Parts catcher extended (parts catcher specification)
5.
While the spindle mode is being changed to the C-axis (milling specification)
Door Unlock
Function
On
The door lock is released. The door can be opened in this state.
The door lock is also released when the M02 or M30 command in a program is read.
The indicator of the switch is lit and the door can be opened.
Even if the M02 or M30 command is executed in the MDI mode, the door lock
cannot be released.
Off
The door is locked. In this state, the door cannot be opened.
If the door is closed again after being opened once, the indicator of the switch
goes off and the door is locked.
DOOR
UNLOCK
NOTE
NOTE
