B-74 MANUAL OPERATION
17
MANUAL OPERATION OF THE WORK REST
(WORK REST SPECIFICATIONS)
The work rest is used to support the workpiece temporarily when changing the workpiece in shaft
work.
The NZ-S1500 can be equipped with two kinds of work rests: with or without work unloading
function.
The work unloading function for the work rest described here is the function that carries
the finished product to the position from which it is taken out.
For work rest automatic operation, refer to the programming manual published
separately.
17-1
Work Rest (Without Work Unloading Function)
The work rest supports a workpiece with two V-notched jigs. The jig under the spindle is called the
"spindle-side work rest" and the one between the tools on turret 2 is called the "tailstock-side work
rest".
NOTE
Tailstock-side work rest
Spindle-side work rest
