A-48 OPERATION PANELS
5-16
Machine Light Switch [LIGHT]
The LIGHT switch is used to turn the machine light on/off.
For the procedure for changing the lamp, refer to the MAINTENANCE INFORMATION.
5-17
Chip Conveyor Switches (Chip Conveyor Specification)
The chip conveyor switches are used to manually operate
the chip conveyor.
Close the front door before operating the chip
conveyor.
LIGHT
Function
On
Pressing this switch turns on the machine light. At the same time, the indicator
in the switch is lit.
Off
Pressing this switch while the machine light is lit turns off the machine light. The
indicator in the switch also goes off.
Switch
Function
When this switch is pressed, the indicator in the switch is lit and the chip
conveyor moves forward to discharge chips.
This switch is valid until the
(STOP) switch is pressed.
When this switch is pressed, the chip conveyor stops.
When this switch is pressed, the indicator in the switch is lit and the chip
conveyor moves backward.
The chip conveyor moves backward only while this switch is held down.
If the chip conveyor is blocked by chips, press this switch to remove the
chips from the chip conveyor.
LIGHT
FOR
BACK
STOP
NOTE
FOR
STOP
BACK
