mori seiki NL1500/500, Руководство по обслуживанию, Страница: 72 / 245

ӏࡾ޷ю
MACHINING CHAMBER
72
6.
ሻȟᆍૺȪȹȗɞکնȾɂǾᆍૺኙ੔ȺȤȟɥȪȽȗɛșȾา৙
ȪȹȢȳȨȗǿ 6. If the window is damaged, take due care to avoid injury caused by
touching the damaged part of the glass.
7.
ɽ˂ɷʽɺȾʁʴɽʽጕ͏۶ɁɕɁɥΈႊȬɞȻʧʴɵ˂ʦʗ˂
ʒɥӐԇȨȮɑȬǿ 7. Using a material other than a silicon-based one for caulking can
degrade the polycarbonate.
ᴹਖ਼ᬲᴻ
<Procedure>
1)
ൡಽ᫖ໃɥȪɖ୽Ȭɞǿ
1)
Turn OFF the main power.
2)
ᚾ౉ɥ՘ɝ۶Ȭǿ
2)
Remove the window frame plate.
3)
աȗሻɥ՘ɝ۶Ȭǿ
3)
Remove the old window.
4)
ሻౕȾ͇ᅔȪȹȗɞʁʴɽʽɥ՘ɝ᪍Ȣǿ
4)
Remove silicon on the window frame plate.
5)
୿ȪȗሻɁ՘͇Ȥ஁տᴥюᴬ۶ᴦɥᆬᝓɁ˨Ǿ۶ϫȾȽɞ
ᬂɁٍ֚ȾʁʴɽʽɥڴࢎȬɞǿ
5)
After confirming the mounting direction (inside/outside) of
the new window, apply silicone sealant to the edges of
outside face of the new window.
6)
୿Ȫȗሻɥ՘ɝ͇Ȥɞǿ
6)
Mount a new window.
2
าᜤ
2
NOTE
า୫஽Ⱦሻ᥂ֿႭհȟඩȪȗȞᆬᝓȪȹȢȳȨȗǿ
Confirm that the window parts No. is correct when making an
order.
7)
ᚾ౉Ɂɀȫɥ፻ɔȹሻɥِްȬɞǿ
7)
Fix the window by tightening the screws on the frame.
8)
‘
ްఙཟ೫
1’
႕ᬂȺሻ̬૰ஓɥᜫްȬɞǿ
8)
Set the replacement date on the ‘PERIODICAL
INSPECTION 1’ screen.
1
ҝёൡಽ଩ͽᝢ஥ం
“‘
ްఙཟ೫
1’
႕ᬂ
”
1
Separate volume, OPERATION MANUAL “‘PERIODICAL
INSPECTION 1’ Screen”
7-2
ൡಽю᥂Ɂຏો
Cleaning Inside Machine
8
Բ᪙
8
DANGER
ൡಽ᫖ໃȝɛɆࡾکϫɁൡಽႊ᫖ໃᴥʠʶ˂ɵᴦɥȪɖ୽Ȫ
ȹȢȳȨȗǿ
Turn OFF the main power and disconnect the plant-side
power supply (breaker).
7
า৙
7
CAUTION
1. ٢᎔ሳ෥ɥΈႊȪȽȗȺȢȳȨȗǿ 1.
Do not use compressed air.
ᵘҒɝȢȭᴬɹ˂ʳʽʒΞоȾɛɞൡಽ୒᪩ᵚ
[Machine failure due to chips and coolant entry]
2. ӏࡾጀ࣊ɥᩋఙ፟ધȬɞȲɔǾൡಽሜӦጶ̘஽ȾɂຏોȪ
ȹȢȳȨȗǿ 2.
To maintain machining accuracy, clean the machining
chamber after completion of machining operations.
Window
Window Frame
Window Frame Plate
ሻ
ሻౕ
ሻɥِްȪȹȗɞᚾ౉
ൡሗ ሻ᥂ֿႭհ
NL1500/2000/2500 W14621
NL3000 W14622
Machine Model
Window Parts
No.
NL1500/2000/2500 W14621
NL3000 W14622