Operator Manual
Digibook 300
29
rev. 3.00
9
TRAINING OF THE OPERATOR
DANGER!
The operator must be trained about the operations to perform during
the occurrence of possible faults, malfunctions or conditions of danger to themselves or
others, and anyway he must perform the following procedures:
Stop the machine quickly by pressing the emergency button (red button installed aboard
of the machine herself);
Do not carry out operations that go beyond the specific knowledge and techniques;
Immediately inform their superior head, avoiding taking personal initiatives.
It is assumed that the operating and maintenance personnel possess the following mini-
mum requirements:
Culture in general and specific enough, each to his ability, to read and understand
the contents of the manual including the correct interpretation of drawings and
diagrams, pneumatic and hydraulic;
Ability to understand correctly the symbols and video messages;
Overall knowledge of the machine and the plant in which it is installed;
Specific experience in the applied technology;
Knowledge on what to do in an emergency, the availability of personal protection
equipment and how to use them.
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
